Clean Rooms

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM Static Pass Boxes designed to minimize traffic and contamination entry into the clean room, enables parts, tools and other work items to be passed to room and from the room. Unit acts as an air lock device preventing ambient air from entering, or clean air from exiting the clean room.

U V lamp                                                             1 No

Illumination                                                      LED Tube light –1 No

Power Supply                                                   230-volt, single phase, 50 cycle

Doors                                                                   Doors   Swing type door with clear PC/Toughened Glass view panel, Electromagnetic interlock & door open/close indicator with beep

Worktable                                                          By IS 304 Grade Stainless Steel surface

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM Dynamic Pass Boxes designed to minimize traffic and contamination entry into the clean room, enables parts, tools and other work items to be passed to and from the room. Unit acts as an air lock device preventing ambient air from entering, or clean air from exiting the clean room. Dynamic Pass Box allows operation in sterile and particle free conditions because the continuous flushing of the working area by a unidirectional and vertical and ultra-filtered airflow, it assures a full product protection.

Cleanliness                                         Class 100 as per ISO 14644 –1

Direction of flow                            Vertical

Air Balancing                                    100% Re-circulation

Particle Retention                          0.3 Micron & above

Down Flow Velocity                     90 FPM ± 20

Noise level                                         60 decibel on “A” scale ± 5

Working Platform                          By IS 304 Grade Stainless Steel Table

Illumination                                      LED light – 1 No

U V lamp                                             1 No

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

Tissue Culture Rack is used extensively for tissue culture plants and other tissue culture work in tissue culture room. Tissue culture rack offered by us is manufactured from tubular mild steel angles

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM Static Pass Boxes designed to minimize traffic and contamination entry into the clean room, enables parts, tools and other work items to be passed to room and from the room. Unit acts as an air lock device preventing ambient air from entering, or clean air from exiting the clean room.

U V lamp                                                             1 No

Illumination                                                      LED Tube light –1 No

Power Supply                                                   230-volt, single phase, 50 cycle

Doors                                                                   Doors   Swing type door with clear PC/Toughened Glass view panel, Electromagnetic interlock & door open/close indicator with beep

Worktable                                                          By IS 304 Grade Stainless Steel surface

 

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

Tissue Culture Rack is used extensively for tissue culture plants and other tissue culture work in tissue culture room. Tissue culture rack offered by us is manufactured from tubular mild steel angles

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

Sterile Tech ^TM  Ceiling Mounted Laminar Airflow

Ceiling Laminar Airflow are used for various applications such as, over a packing and filling lines in the pharmaceutical industry, food processing industry, in the assembly line of precious engineering components, pre-operative and post-operative care of critically ill patients and widely being used inside the OPERATION THEATRE during critical surgery etc. CEILING SUSPENDED LAMINAR AIRFLOW provides ultra-clean sterile CLASS 100 clean air in an isolated area where various kinds of critical and highly sensitive process activities are carried out. CLAF is designed as per CLASS 5 OF ISO 14644-1 standards.

Additional Information:

• Production Capacity: 2nos per month
• Delivery Time: 2-3 weeks

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM   Vertical Laminar Airflow

Vertical Laminar Airflow system allows operation in sterile and particle free conditions because the continuous flushing of the working area by a unidirectional and vertical and ultra filtered airflow, it assures a full product protection.

Cleanliness                         Class 100 as per ISO 14644-1

Direction of Flow           Vertical

Particle Retention          0.3 Micron & Above

Noise Level                        65 decibel on “A” scale ± 5

Velocity                               90 Feet / Minute ± 20

Worktable                          By IS 304 Grade Stainless Steel surface

Door                                     Framed Polycarbonate-Sliding type

U V lamp                             1 No.

Illumination                       LED tube light-1No.

Pressure (∆P)                   Digital Magnehelic gauge-Low and High Pressure Indicator

Other accessories           5/15 Amp power point- 1No, Castor Wheel -1set, Gas Nozzle-1no

Power Supply                   230V, Single phase, 50 Hz

 

Product Details:

Sterile Tech ^TM   Horizontal Laminar Airflow

Horizontal Laminar Airflow system allows operation in sterile and particle free conditions because the continuous flushing of the working area by a unidirectional and Horizontal and ultra-filtered airflow, it assures a full product protection.

Cleanliness                         Class 100 as per ISO 14644-1

Direction of Flow           Horizontal

Particle Retention          0.3 Micron & Above

Noise Level                        65 decibel on “A” scale ± 5

Velocity                               90 Feet / Minute ± 20

Worktable                          By IS 304 Grade Stainless Steel surface

Door                                     Foldable Polycarbonate

Side View                            Toughened Glass /PC

U V lamp                             1 No.

Illumination                       LED tube light-1No.

Pressure (∆P)                   Inclined Manometer 

Other accessories           5/15 Amp power point- 1No, Castor Wheel -1set,Gas Nozzle-1no

Power Supply                   230V, Single phase, 50 Hz

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM   Air Shower   concentrated airflows to lift off contamination such as lint, dirt, dust etc., while an individual simply moves in or walks through a specially constructed chamber. The high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air then flows through sidewalls of the air shower and flows through pre filters and final HEPA filters.

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM   Air Shower   concentrated airflows to lift off contamination such as lint, dirt, dust etc., while an individual simply moves in or walks through a specially constructed chamber. The high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air then flows through sidewalls of the air shower and flows through pre filters and final HEPA filters.

Additional Information:

• Production Capacity: 15nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE Foam

Product Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM Garment Storage Cabinet (Static)

The garments storage cabinets is consist of UV Lamp for Sterilization, IR Lamp to maintain the temperature, Swing type glass doors and horizontal partition are provided in the storage cabinet for keeping folded garments.

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

Sterile Tech ^TM   Fume Exhaust Hoods

 Fume Cupboard is of constant supply air hood with auxiliary bye-pass provision. Three sides of the hood are permanently closed and the front side provided with sliding door..

Inside the working chamber, there will be a sturdy baffle provided at about 200mm above the work-table to uniformly direct the fumes / odour / smoke directly in to the hood’s exhaust system. Suction will be done at three different levels suitable for mild to heavy fumes

Additional Information:

• Production Capacity: 15 nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

STERILE TECH ^TM   Modular Clean Room CLASS 10,000 (ISO 7 of 14644-1) at rest

Scope: Design, supply, installation & testing of CLASS 10,000 Modular Clean Room facilities of Area-10 Lx 10W x 2.7H=100 sq.mtr approx.,

Design: The proposed MODULAR CLEANROOM with VERTICAL LAMINAR AIRFLOW will be designed with 90% air recirculation and 10% fresh air thus providing about 70 air change per hour. Fresh air taken through 10-micron pre-filters and 5micron filter at the AHU and the return air is collected through the return-air-raisers located on the wall panels. In-order to maintain a balanced pressure and to compensate continuous fresh air intake, At least 10% air is exhausted out.

Additional Information:

• Production Capacity: 2 projects per month
• Delivery Time: 3-4 weeks
• Packaging Details: EPE foam

Product Details:

STERILE TECH ^TM   Modular Clean Room CLASS 1,00,000 (ISO 8 of 14644-1) at rest

Scope: Design, supply, installation & testing of CLASS 1,00,000 Modular Clean Room facilities of Area-10 Lx 10W x 2.7H=100 sq.mtr approx.,

Design: The proposed MODULAR CLEANROOM with VERTICAL LAMINAR AIRFLOW will be designed with 90% air recirculation and 10% fresh air thus providing about 35 air change per hour. Fresh air taken through 10-micron pre-filters and 5micron filter at the AHU and the return air is collected through the return-air-raisers located on the wall panels. In-order to maintain a balanced pressure and to compensate continuous fresh air intake, At least 10% air is exhausted out.

Additional Information:

• Production Capacity: 2 projects per month
• Delivery Time: 3-4 weeks
• Packaging Details: EPE foam

Product Details:

Description:
Modular Cleanroom complete accessories supports your Cleanroom by providing control over contamination, static, microorganisms, humidity and other critical operating conditions. Regardless of your Cleanroom requirements, we provide a complete system and perform all installation to your production schedule.Our accessories include Aluminium Powder Coated /Anodized Covings, PVC Covings, 90and180degree Bends and room corner pieces etc.

Additional Information:

• Packaging Details: EPE foam

Product Details:

R60 PVC coving with back cover,

• Thickness : 2-15mm
• Material : PVC
• Color : White and Off white
• Contraction Percentage : 0.4%
• Feature : Soft Edges
• Application : Wall
• Tensile Strength : 81-130 MPa

Additional Information:

• Item Code: SPC70

Description:
Modular Cleanroom complete accessories supports your Cleanroom by providing control over contamination, static, microorganisms, humidity and other critical operating conditions. Regardless of your Cleanroom requirements, we provide a complete system and perform all installation to your production schedule.Our accessories include Aluminium Powder Coated /Anodized Covings, PVC Covings, 90and180degree Bends and room corner pieces etc.Request
Callback

Additional Information:

• Production Capacity: 1000rmt
• Delivery Time: 2weeks

Additional Information:

• Item Code: SAC70

Sandwich panels for Cleanroom systems are designed according to the latest GMP norms. Our array of quality is Modular Wall Panels, Walk-able & Non-walk able ceiling Panels with in fill material of PUF, EPS and Rockwool. Each and every component of the systems is engineered & developed for easy installation and functioning. Our Modular technology is very reasonable at cost and more flexible at usage. This whole system can be assembled and demounted with more ease.

Special Features of panels

• Extremely Low Weight
• Excellent Strength
• High Resistance to Moisture
• High Resistance to Corrosion
• Excellent Thermal Conductivity
• Non Combustible
• High Resistance to Fungi
• Easy Installation
• Easily Cleanable

Additional Information:

• Item Code: PUF

Product Details:

Description:
Modular Cleanroom complete accessories supports your Cleanroom by providing control over contamination, static, microorganisms, humidity and other critical operating conditions. Regardless of your Cleanroom requirements, we provide a complete system and perform all installation to your production schedule.Our accessories include Aluminium Powder Coated /Anodized Covings, PVC Covings, 90and180degree Bends and room corner pieces etc.

Additional Information:

• Item Code: SAC65

Sandwich panels for Cleanroom systems are designed according to the latest GMP norms. Our array of quality is Modular Wall Panels, Walk-able & Non-walk able ceiling Panels with infill material of PUF, EPS, and Rockwool. Each and every component of the systems is engineered & developed for easy installation and functioning. Our Modular technology is very reasonable at cost and more flexible at usage. This whole system can be assembled and demounted with more ease.

Features:

• Extremely Low Weight
• Excellent Strength
• High Resistance to Moisture
• High Resistance to Corrosion
• Excellent Thermal Conductivity
• Non Combustible
• High Resistance to Fungi
• Easy Installation
• Easily Cleanable

Additional Information:

• Item Code: panel

R60 PVC coving with back cover,

• Thickness : 2-15mm
• Material : PVC
• Color : White and Off white
• Contraction Percentage : 0.4%
• Feature : Soft Edges
• Application : Wall
• Tensile Strength : 81-130 MPa

Product Details:

Sterile Tech Supply wall / Ceiling panel made of 80mm thick PUF insulated 0.5mm thick PPGI/PPGI laminated panels, including accessories and hardware.

Additional Information:

• Production Capacity: 15nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam

Product Details:

Sterile Tech^TM   Positive Pressure Module:

Pressure Module is designed to provide clean air in a small enclosure. These modules feeds filtered dust-free air to built-up and maintain positive pressure in the sterile area. The positive pressure effect caused by the module ensures that the air movement is always outside and prevents entry of contaminated air inside the sterile area.

Additional Information:

• Production Capacity: 15nos per month
• Delivery Time: 2-3 weeks
• Packaging Details: EPE foam