Sterile Tech India

Sterile Tech Class III, Bio Safety Cabinet offer the highest level of product, operator and environmental protection from infectious/ bio hazardous aerosols and are suitable for microbiological work with agents assigned to biological safety levels the Class III Bio safety Glove Box operates at a vacuum relative to the room with the service compartment under a slight vacuum. Room air enters the cabinet through a pre-filter into the service compartment where it is drawn through an inlet HEPA filter. Air exits the inlet HEPA into the work zone through a distribution manifold to promote a uniform flushing of the work zone to constantly purge the interior of contaminates. The contaminated air is drawn to the top of the work area where it is exhausted into the facility exhaust system. The interior of the cabinet is maintained at negative pressure by an optional motor blower or plant exhaust system.

Designed around your Maximum Containment Research:

• Sterile Tech customization process starts at defining your specifications needed for your BSL-3 application. Our Class III Bio safety Cabinets offer maximum protection against pathogenic agents ensuring a gas tight working environment. Consider Sterile Tech Class III Glove Boxes when working with infectious agents, chemical carcinogens, aerosols, or high concentrations of low to moderate risk agents in microbiology, bacteriology, virology, culture analysis and more. How it Works: The Class III Bio safety Glove Box operates at a vacuum relative to the room with the service compartment under a slight vacuum. Room air enters the cabinet through a pre-filter into the service compartment where it is drawn through an inlet HEPA filter. Air exits the inlet HEPA into the work zone through a distribution manifold to promote a uniform flushing of the work zone to constantly purge the interior of contaminates. The contaminated air is drawn to the top of the work area where it is exhausted into the facility exhaust system. The interior of the cabinet is maintained at negative pressure by an optional motor blower or plant exhaust system. Monolithic Pressure Tight Construction: A single shell, high grade stainless steel, fully welded cabinet eliminates potential leaks that may occur through failures of gaskets and cabinet seams.

Technical Details:

PRODUCT INTRODUCTION

Sterile Tech ^TM Garment Storage Cabinet (Dynamic)

The HEPA-filtered vertical airflow, which is discharged to the storage area, creates an ultra-clean work environment at inside to minimize the cross contamination. The garments storage cabinets is consist of UV Lamp for Sterilization, IR Lamp to maintain the temperature, Swing type Framed glass doors and SS perforated horizontal partition are provided in the storage cabinet for keeping folded garments.

Cleanliness level                              CLASS 100 (CLASS 5 as per ISO 14644 –1)

Velocity                                               90 FPM ± 20

Direction of Flow                           Vertical – Down Flow

Air Balancing                                    100% Fresh Air

Particle Retention                          0.3 MICRON

Noise Level:                                       65 decibels ± 5

Differential Pressure                     Digital Magnehelic gauge-Low and High pressure indication

Illumination                                      LED Tube light-1 No.

UV Lamp:                                           1 No.

IR lamp:                                              infra-red bulb to maintain ambient temperature